Step-by-step guide to perfect new modeling

Magic Base on natural nails

Preparation

Careful preparation is the key to long-lasting, professional
results:

1. Remove material residue : Thoroughly remove any old layers of gel, acrylic or nail polish from the nail.

2. Clean nails : Wash your hands thoroughly to remove grease and dirt.

3. Cuticle care : Gently push back cuticles with a cuticle pusher. Carefully remove excess cuticles with a cuticle remover or nail scissors. Be careful not to damage the delicate skin.

4. Roughen the nail surface :
Lightly buffer the surface of the natural nail until it is matte. File the nails to the desired shape and length. Remove the nail dust with a dust brush.

5. Degreasing and optimizing :
Clean the nail with a tissue and the optimizer to remove oil and moisture. If necessary, apply the primer sparingly to the nail. This improves the adhesion of the Magic Base and prevents lifting. Let it dry for 30 seconds.

modeling

1st adhesion layer
Apply a thin layer of Magic Base evenly to the prepared nail. Make sure the layer is not too thick to ensure optimal curing. Cure the adhesive layer under a UV or LED lamp (30-60 seconds).

2. Structure - For stability and a natural look:

  • Place a small drop of gel in the back third of the nail.
  • Spread the gel with the brush in a floating motion towards the tip of the nail.
  • Make sure the gel does not touch the cuticles to avoid lifting.
  • Seal the nail tips by gently brushing the gel over the edge.
  • Tip for perfect shape : Turn your finger over briefly so that the gel forms an even C-curve.
  • Cure the gel under the lamp (at least 60 seconds).

Additional option : For weak or brittle nails, a second coat can be applied to increase stability.

fine-tuning

Remove the sticky layer : Clean the sticky layer on the nail surface with a cleaner or the optimizer.

  1. Smoothing and shaping : Smooth the surface with a buffer to remove any imperfections. Perfect the shape with a file.
  2. Note the C-curve : The perfect shape shows a slight C-curve from the front view and a curved C-curve from the side view.

design and color

  1. Color varnish: If necessary, apply 1-2 thin layers of UV Lack4all gel varnish or normal nail varnish. Cure each layer (for gel varnish) under the lamp.
  2. Seal:

Gel polish: Seal the nails with a top sealer. Make sure to seal the nail tips as well to prevent chipping. Cure the sealer under the lamp (60 seconds).

Nail polish: Use the Top Coat Quick Dry for quick drying and longer durability.

finish and care

Cuticle care : Finish by applying cuticle oil to moisturize and keep skin supple.

Regular care : Make sure to care for your nails regularly to ensure a long-lasting, beautiful manicure.

ADDITIONAL TIPS FOR A PERFECT RESULT

  • Patience when building : For beginners, it is recommended to work slowly and perfect the C-curve with a little practice.
  • Multiple coats: Apply several thin coats of material one after the other rather than one thick coat.
  • Check lamp power : A weak UV/LED lamp can result in insufficient curing.